Romeda Hardware Systems

motor_surucu

Motor Driver

The motor driver card is a card designed for driving and controlling motors requiring high power which can run between 5.5V and 40V. It can give 23A continuously. Supports PWM signals up to 40 kHz. Isolate against sudden voltage changes.

  • Number of Motor Channels: 1
  • Minimum Operating Voltage: 5.5V
  • Maximum Operating Voltage: 40V
  • Continuous Output Current: 23A
  • Maximum PWM Frequency: 40 kHz
  • Insulation: Yes

MottoDriver MT-01

MottoDriver MT-01 is designed for the control of sliding and telescopic doors, with the possibility of being easily customizable for many DC servo motor applications.

  • Operating voltage: 10-30VDC
  • Maximum motor output power: 250W
  • Configurable with LCD panel
  • Internal radar, external radar, photocell inputs
  • Emergency entry and exit
  • Battery charge and supply unit
  • Position switch unit
  • Dual port RS485 communication support
  • Analogue and digital on and off speed setting
  • Customizable dc servo motor drive control (Fuzzy-PID) control unit for different applications

MottoDriver MT-02

MottoDriver MT-02 is designed for the control of sliding and telescopic doors, and it comes to the forefront because it is easily customizable for many DC servo motor applications.

  • Operating voltage: 10-30VDC
  • Maximum motor output power: 250W
  • Internal radar, external radar, photocell inputs
  • Built-in photocell unit
  • Position switch unit
  • RS485 communication support
  • Analogue and digital on and off speed setting
  • Customizable dc servo motor drive control (Fuzzy-PID) control unit for different applications

Card Reader

The Card Reader can be manufactured in accordance with MIFARE (13.56 MHz) or Proximity (125 KHz) standards. The number of I / O in the market can be increased in line with your needs.

  • Produced according to MIFARE or Proximity standards
  • Supports RS232 / UART and I2C
  • Number of I/Os can be configured

ROMotion RM-01

It can be used as motion detection detector, automatic door radar, security systems and motion detection unit in the lighting field, which operates according to the Doppler working principle.

  • 24GHz - ISM doppler motion detection sensor
  • Operating voltage: 6-30VDC
  • Motion detection distance 1-6m
  • Contact output up to 250mA
  • It can be configured with automatic door control cards and for different applications.

Data Collection Card

DAQhunt DH-02

It is designed as general purpose configurable HMI panel for automation applications, signal processing and data acquisition card.

  • Dual-core ARM Cortex M4 / MO processor
  • 256 Mb SDRAM
  • 1 Gb External flash
  • 24 Bit parallel TFT interface
  • External FPGA connection unit
  • RMII Ethernet interface TCP / IP, UDP support
  • Data collection and signal processing algorithms

Display Driver